VIPA
Elektronik-Systeme GmbH

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

Mo-Th:
09:00-12:00 / 13:00-16:00
Fr:
09:00 - 13:00

Corona - Information:
We are in full operation and will be happy to promptly supply you with all of the modules from our portfolio.
PLC >> VIPA SLIO Bus Terminals

SLIO - the smart I/O-system

Bus Terminals

Demand for a more compact and flexible automation solutions with a reasonable price-performance ratio has been constantly increasing. With the development of the completely new I/O system SLIO®, VIPA is setting a new standard in the automation sector. The VIPA I/O system SLIO combines high functionality with an intelligent mechanical concept and an extremely compact design. SLIO® is a synonym for slice-I/O. With its very compact design, the system can be set-up step by step to exactly meet the requirements of the application. The Interface Modules (IM) for PROFIBUS-DP, CANopen, PROFINET, EtherCAT and Modbus can support up to 64 Electronic Modules (EM). The Power Modules (PM), which are contrasting in color to Signal Modules (SM) and Function Modules (FM), supply voltage to the Electronic Modules. Decoupled potential groups can be defined if required.
Busklemme.jpg
The Electronic Modules are connected to the Terminal ModuleTM using a secure plug-in mechanism. The Terminal Module is comprised of a clamp, connection of Electronic Modules and mechanical bus connector. Therefore, if maintenance or repair are required, only the Electronic Module will have to be exchanged by simply pulling it out of the Terminal Module. Wiring and mounting on the 35mm DIN rail will remain unchanged. The staircase-shaped cage, which clamps on the Terminal Module offers fast, clear, and secure wiring. With the integrated status-LEDs and the labeling strip on the front, an exact state monitoring of channels on the Electronic Module is possible. The new backplane bus system with a transmission rate of 48Mbit/s offers very short response times with a signal processing of less than 20µs. SLIO® is one of the most powerful and cost-effective decentralized systems available in the market.
Beschriftung.jpg

INTERFACE-MODULES (IM)

The space-saving Interface-Module represents the interface between process level and bus system. All control signals are transmitted to the Electronic Module through the internal backplane bus.
  • Supports various fieldbus systems
  • Exchangeable Power Module, easy-to-maintain
  • Functional DIP-switch for address setting for PROFIBUS-DP and CANopen with transparent cover
  • IP addressing in clear text on the front
  • Potential decoupling between fieldbus and input/output level
  • Up to 64 Signal and Function Modules per Interface Module

SIGNAL-MODULES (SM)

Electronic Module for connection of sensors and actuators, registration of digital and analog signals in and out of the process.
  • Direct allocation and monitoring of channel states via status LEDs
  • Secure and time-saving installation due to terminal assignment on the module
  • Item designation will remain unchanged in case of module exchange
  • Individual labelins of channels with blank strips

FUNCTION-MODULES (FM)

Electronic Module for connection of sensors and actuators, registration of digital and analog signals in and out of the process.
  • SSI-Module
  • Counter-Module
  • Others in preparation

POWER-MODULES (PM)

Power Module for refreshing of backplane bus power. The double-component-design ensures easy maintenance due to the separation of electronics from the Terminal Module.
  • Decoupling of potential groups
  • Voltage supply on sensor/actuator level
  • Mounting security due to reverse-connect and overvoltage protection

EASY INSTALLATION ANDMAINTENANCE

  • Two-component modules with Terminal Module and Electronic Module for easy maintenance
  • Easy mounting due to plug-in mechanism
  • Click-connection for fast mounting of shield connection
  • Protection against wrong combination of Terminal- and Electronic-Modules per encoding

CLEVER AND USER-FRIENDLY LABELLING

  • Status-LEDs with direct allocation on the labelins strip
  • Terminal assignment and connection diagrams on each module
  • Item designation will remain unchanged in case of module exchange
  • Blank strips for individual labeling of modules

CLEAR STATUS MONITORING AND DIAGNOSIS

  • Indication of diagnosis and channel states via LEDs
  • Clear allocation and indication of channel states
  • Secure and time-saving installation and maintenance through terminal assignment printed on the module

PERFORMANCE-ORIENTED BACKPLANE BUS

  • One Terminal Module for all Signal and Function Modules
  • Transmission rate 48Mbit/s
  • Fast response time of 20µs upwards
  • Detailed diagnosis of each Electronic Module in the system

SPACE ANDTIME-SAVING CONNECTION TECHNOLOGY

  • Space-saving staircase-shaped wiring with cage clamps
  • Quick pre-wiring due to separate installation level
  • Easy module exchange due to standing wiring
  • High modularity due to 2, 4 and 8 channel modules
Busklemme_Versorgung.jpg
  • 1) DC 24V for power section supply I/O area (max. 10A via 0AA00/1AB00)
  • 2) DC 24V for electronic power supply bus coupler
  • 3) DC 24V for power section supply I/O area (max. 4A via 1AB10)
  • 4) DC 24V for electronic power supply bus coupler

INTERFACE-MODULES (IM)

The space-saving Interface-Module represents the interface between process level and bus system. All control signals are transmitted to the Electronic Module through the internal backplane bus.
  • Supports various fieldbus systems
  • Exchangeable Power Module, easy to maintain
  • Functional DIP-switch for address setting for PROFIBUS-DP, PROFINET and CANopen with transparent cover
  • IP addressing in clear text on the front
  • Potential decoupled between fieldbus and input/output level
  • Up to 64 Signal and Function Modules per Interface Module
SLIO_Masse.jpg
Interface_Modul.jpg
INTERFACE-MODULES
Incl. 007-0AA00 POWER-MODULE
Order No.:
                          Name / Technical data
053-1CA00
IM 053CAN / CANopen-Slave, max. PB (parameterbytes): 128
053-1DN00
IM 053DN / DeviceNet-Slave, max. PB (parameterbytes): 256
053-1DP00
IM 053DP / PROFIBUS-DP-Slave, max. PB (parameterbytes): 244
053-1PN01
IM 053PN / PROFINET-IO Slave, transfer rate 100MBd, PB:512
053-1EC01
IM 053EC / EtherCAT-Slave, transfer rat 100MBd, PB:4kB
053-1MT00
IM 053NET / Modbus-/TCP/IP- slave, adjustable I/O cycle 0.5..4msec
053-1IP00
IM 053MT / Ethernet/IP-Slave, PB (parameterbytes): 512
053-1AA00
IM 060 / Line extension, Master
053-1BA00
IM 061 / Line extension, Slave  

FUNCTIONS-MODULES (FM)

Electronic Module for realization of automation requirements, e.g. fast counting. For measuring and positioning the following function modules will complement the SLIO® System in the future:
  • SSI-Modul
  • Counter-Module
  • others in preparation
Funktions_Modul.jpg
FUNCTIONS-MODULES
incl. 001-0AA00 TERMINAL-MODULE
Order No.:
                          Name / Technical data
050-1BA00
FM 050 - Counter module / Counter 1x32Bit (AB), DI 24VDC, up to 100kHz,
DO 1x 24VDC/0,5A, Gate-, Latch-, Reset-Connector, Alarm, Diagnose
050-1BA10
FM 050 - Counter module/Counter 1x32Bit (AB), DI 5VDC, up to 500kHz
Differential signal, Reset-Connector, Alarm, Diagnose
050-1BB00
FM 050 - Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 400kHz
Alarm, Diagnose
050-1BB30
FM 050 - ECO Counter module/Counter 2x32Bit (AB), DI 24VDC, up to 100kHz
050-1BB40
FM 050 - Counter module/Frequenz 2x24Bit (AB), DI 24VDC, up to 600kHz
050-1BS00
FM 050S - SSI-Module / 1xSSI, RS422, 24/32 Bit, 100/300/600kBit/s
Motion_Module.jpg
MOTION-MODULES
incl. 001-0AA00 TERMINAL-MODULE
Best.-Nr.:
                      Bezeichnung / Technische Daten
054-1BA00
FM 054 - stepper module / 1-channel with feedback,
2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control
frequency 32 kHz, step pattern 64-times microstepping
054-1CB00
FM 054 - DC-motor module / 2-channel with feedback,
2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC,
PWM clock frequency 32 kHz
054-1DA00
FM 054 - Pulse Train output module / 1-channel RS422 with feedback,
2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz
Kommunikations_Modul.jpg
COMMUNICATIONS-MODULES
incl. 007-0AA00 POWER-MODULE
Order No.:
                          Name / Technical data
040-1BA00
CP 040 - Communication processor, RS232 interface
Communication: ASCII, 3946R, ModbusRTU/ASCII (Master/Slave,
short/long) lenth of telegram: max. 250Byte, up to 250 telegrams
eceive-/send buffer: 1024Byte
040-1CA00
CP 040 - Communication processor, RS422/485 interface
Communication: ASCII, 3946R, ModbusRTU/ASCII (Master/Slave,
short/long) lenth of telegram: max. 250Byte, up to 250 telegrams 
receive-/send buffer: 1024Byte
POTENTIAL DISTRIBUTOR-MODULES
max. TERMINAL CURRENT 10A
Order No.:
                    Name / Technical data
001-1BA00
Potential distributor module 24V/8xDC +24V clamps
001-1BA10
Potential distributor module 24V/8xDC 0V clamps
001-1BA20
Potential distributor module 24V/4xDC +24V and 4xDC 0V terminals
Potenzialverteiler_Modul.jpg
                                POWER-MODULES
               incl. 001-0AA00 TERMINAL MODULE
Order No.:
                         Name / Technical data
007-1AB00
Power Supply connection module, DC 24V, max. 10A
007-1AB10
Power Supply connection module, DC 24V, max. 4A
with integrated power supply 5V/2A for the internal electronics
Power_Modul.jpg
POTENTIAL DISTRIBUTOR-MODULES
Order No.:
                     Name
950-0KD30
SLIO Line Extension Cable, length: 2m, 2x RJ45
290-1AF00
35 mm Alu DIN-Profile Rail, Length: 2000mm
290-1AF30
35 mm Alu DIN-Profile Rail, Length: 530mm
000-0AB00
SLIO Shield Bus Carrier, 10 pieces
Signal_Modul_Eingang.jpg

SIGNAL-MODULEs (SM)

Electronic Module for connection of sensors and actuators, registration of digital and analog signals in and out of the process.
  • Direct allocation and monitoring of channel status via state LEDs
  • Secure and time-saving installation due to terminal assignment on the module
  • Item designation will remain unchanged in case of module exchange
  • Individual labeling of channels with blank strips
SIGNAL-MODULES DIGITAL INPUT
incl. 001-0AA00 TERMINAL MODULE
Order No.:                    Name / Technical data
021-1BB00SM 021 - Digital input / DI 2xDC 24V
021-1BD00SM 021 - Digital input / DI 4xDC 24V
021-1BD40SM 021 - Digital input / DI 4xDC 24V (4x2/3-wire)
021-1BD50SM 021 - Digital input / DI 4xDC 24V, NPN
021-1BF00SM 021 - Digital input / DI 8xDC 24V
021-1BF01SM 021 - Digital input / DI 8xDC 24V, 0,5 ms
021-1BF50SM 021 - Digital input / DI 8xDC 24V, NPN
021-1DF00SM 021 - Digital input / DI 8xDC 24V, wiring diagnosis
021-1BB10Digital input SM 021, DI 2 x speed inputs, input filter 
time delay parameterized 2s ... 4ms, PB: 9
021-1BD10Digital input SM 021, DI 4 x fast inputs, input filter
time delay parameterized 2s ... 4ms, PB: 11
Signal_Modul_Ausgang.jpg

SPACE AND TIME-SAVING CONNECTION TECHNOLOGY

  • Space-saving staircase-shaped wiring with cage clamps
  • Quick pre-wiring due to separate installation level
  • Easy module exchange due to standing wiring
  • High modularity due to 2, 4 and 8 channel modules
SIGNAL-MODULE DIGITAL OUTPUT
 incl. 001-0AA00 TERMINAL MODULE
Order No.:                            Name / Technical data
022-1BB00SM 022 - Digital output / DO 2xDC 24V, 0,5A
022-1HB10
SM 022 - Digital output / DO 2xDC 30V/AC 230V, 3A,
relays, potential decoupled per channel
022-1HD10SM 022 - Digital output / DO 4xDC 30V/AC 230V, 1,8A,
Relais, potenzialgetrennt je Kanalrelays, potential decoupled per channel
022-1BD00SM 022 - Digital output / DO 4xDC 24V, 0,5A
022-1BD50SM 022 - Digital output / DO 4xDC 24V, 0,5A, NPN
022-1BD20SM 022 - Digital output / DO 4xDC 24V, 2A
022-1BF00SM 022 - Digital output / DO 8xDC 24V, 0,5A
022-1BF50SM 022 - Digital output / DO 8xDC 24V, 0,5A, NPN
022-1DF00SM 022 - Digital output / DO 8xDC 24V, 0,5A, wiring diagnosis
022-1BB90SM 022 - Digital output / DO 2xDC 24V, 0,5A, max. 40kHz, PB: 12
VIPA_022-1BB70.jpg

ETS TIMESTAMP-SYSTEM

There are digital input and output modules with order memory (FIFO) available to buffer the signal edges. These terminals are marked with the abbreviation ETS (Edge Timestamp System). SLIO ETS offers a temporary significantly improved exactness at the µs area for all supported fieldbus systems.
ETS SIGNAL-MODULES DIGITAL
incl. 001-0AA00 TERMINAL MODULE
Order No.:
               Name / Technical data
021-1BB70
ETS Digital input SM 021, DI 2x 24VDC, PB: 10
ETS-Buffer: 15 time stamps, Time resolution: 1sec
022-1BB70
ETS Digital output SM 022, DO 2x 24VDC/0,5A, PB: 6
ETS-Buffer: 15 time stamps, Time resolution: 1sec
021-1BD70
ETS Digital input SM 021, DI 4x 24VDC, PB: 12
ETS-Buffer: 15 time stamps, Time resolution: 1sec
022-1BD70
ETS Digital output SM 022, DO 4x 24VDC/0,5A, PB: 6
ETS-Buffer: 15 time stamps, Time resolution: 1sec
ETS_Signal_Modul.jpg

THE SAFETY MODULES FOR SLIO:

  • 4-channel or 2-channel inputs and outputs for higher Safety requirements (SIL3)
  • Digital signals: 24 V
  • Used Safety protocol: PROFIsafe for PROFIBUS and PROFINET
  • Up to 4095 Safety modules in an equipment possibly
  • Safe parameters: Input delay, change-over between one and two channel analysis, channel activation a.s.o.
  • Response times <10 ms
  • Registration to SIL3 (Safety Integrity level) and PL e (performance level)
SAFETY-MODULES
inkl. 001-0AA00 TERMINAL MODULE
Order No.:
Name / Technical data
021-1SD00
SM 021 - SAFETYDigital input / DE 4xDC 24V, PB: 44
022-1SD00
SM 022 - SAFETYDigital output / DA 4xDC 24V/0,5A, PB: 44

SIGNAL MODULES ANALOG

Signal modules (SM) to connecting sensors and actuators are the interfaces of the system to the process. Analog signal modules acquire the analog control signals (e.g. measurement data) to and out of the process level. Depending on the application and type the control signals are acquired from the process level and converted into interpretable signals for controlling. Analog output modules convert the internal control signals into signals suitable for the process level.

A variety of different analog signal modules accurately provide the inputs and outputs that are required for each task. The analog modules differ in the number of channels, voltage and current ranges, isolation, and diagnostic and alarm capability.
Masse_ErweiterungsmodulCPU014015017.jpg

CHARACTERISTICS

  • 2 or 4 channel with 12 bit or 16 bit resolution
  • Functions of the inputs / outputs programmable
  • Most various assemblies, suitable for measuring transducers (current/voltage, resistance or temperature sensors)
  • Direct mapping and readability of the channel conditions via status LEDs
  • Safe and time-saving installation by the terminal assignment mounted on the module
  • When changing the module equipment identification (BMK) is retained on the TM
  • Individual single-channel lettering on insertion strip
Signal_Mod_Analog_EG_12BIT.jpg
SIGNAL-MODULES ANALOG EINGANG 12BIT
incl. 001-0AA00 TERMINAL MODULE
Order No.:
                   Name / Technical data
031-1BB10
SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA
supply 2x 35mA for 2x 2-wire sensors integrated, PB: 15
031-1BB30
SM 031 - Analog input / AI 2x12Bit, 0 - 10V, PB: 6 
031-1BB40
SM 031 - Analog input / AI 2x12Bit, (0) 4 - 20mA, PB: 6
031-1BB60
SM 031 - Analog input / AI 2x12Bit, (4) 4 - 20mA, Sensor, PB: 6
031-1BB70
SM 031 - Analog input / AI 2x12Bit, -10V ... +10V, PB: 6  
031-1BD30
SM 031 - Analog input / AI 4x12Bit, 0 - 10V, PB:8
031-1BD40
SM 031 - Analog input / AI 4x12Bit,  (0) 4 - 20mA, PB: 8
031-1BD70
SM 031 - Analog input / AI 4x12Bit, -10V ... +10V, PB: 8 
031-1BF60
SM 031 - Analog input / AI 8x12Bit,  (0) 4 - 20mA, PB: 10
031-1BF74
SM 031 - Analog input / AI 8x12Bit, -10V ... +10V, PB: 10
Signal_Mod_Analog_EG-12BIT.jpg
SIGNAL-MODULES ANALOG EINGANG 16BIT
incl. 001-0AA00 TERMINAL MODULE
Order No.:
Name / Technical data
031-CB30SM 031 - Analog input / AI 2x16Bit, 0 - 10V, PB:20
031-CB40SM 031 - Analog input / AI 2x16Bit, (0) 4 - 20mA, PB:20
031-CB70SM 031 - Analog input / AI 2x16Bit, -10V ... +10V, PB:20
031-CD30SM 031 - Analog input / AI 4x16Bit, 0 - 10V, PB: 32
031-CD35SM 031 - Analog input / AI 4x16Bit, 0 - 10V, PB: 9 
031-CD40SM 031 - Analog input / AI 4x16Bit,  (0) 4 - 20mA, PB: 32
031-CD45SM 031 - Analog input / AI 4x16Bit,  (0) 4 - 20mA, PB: 9
031-CD70SM 031 - Analog input / AI 4x16Bit, -10V ... +10V, PB:32
031-BD80SM 031 - Analog input / AI 4x16Bit, R, RTD (2x3/4-wire),
PT100/PT1000, Ni100/Ni1000, 0 - 3000 Ohm, PB: 34
031-LD80SM 031 - Analog input / AI 4x16Bit, R, RTD (2x3/4-wire),
PT100/PT1000, Ni100/Ni1000, 0 - 3000 Ohm, PB: 12
031-BB90SM 031 - Analog input / AI 2x16Bit, TC (-80mV..+80mV),
ThermocouplerTyp B, C, E, J, K, L, N, R, S, T, PB: 22
Terminal Module 001-0AA20 with temperature compensation included
031-LB90SM 031 - Analog input / AI 2x16Bit, TC (-80mV..+80mV),
ThermocouplerTyp B, C, E, J, K, L, N, R, S, T, PB: 10
Terminal Module 001-0AA20 with temperature compensation included
031-CA20SM 031 - DMS-Modul, 1-kanalig Vollbrücke, 16 (24) Bit
auto/self calibration, parallel operation of load cells,
onboard power supply 2,5V, 5V, 7,5V, 10V, 12V
Signal_Mod_Analog_AG_12BIT.jpg
SIGNAL-MODULES ANALOG AUSGANG  12BIT
incl. 001-0aa00 TERMINAL MODULE
Order No.:
Bezeichnung / Technische Daten
032-1BB30
SM 032 - Analog output / AO 2x12Bit, 0 - 10V, PB: 8  
032-1BB40
SM 032 - Analog output / AO 2x12Bit, (0) 4 - 20mA, PB: 8
032-1BB70
SM 032 - Analog output / AO  2x12Bit, -10V ... +10V, PB: 8    
032-1BD30
SM 0322 - Analog output / AO 4x12Bit, 0 - 10V, PB: 10
032-1BD40
SM 032 - Analog output / AO 4x12Bit, (0) 4 - 20mA, PB: 10
032-1BD70
SM 032 - Analog output / AO 4x12Bit, -10V ... +10V, PB: 10

SLIO DMS MODULE

The SLIO DMS modules allows direct connection of a resistor full bridge (DMS) or load cell in the 4- or 6-wire connection. Power supply already integrated.
Typical fields of applications
  • Filling level monitoring of silotanks and bunkers
  • Measuring and determination of rope and crane loads
  • Force measuring, Container scal
SLIO_Grafik.jpg
DMS_Module.jpg
DMS-MODULE
incl. 001-0AA00 TERMINAL MODULE
Order No.:
               Name / Technical data
031-1CA20
SM 031 - DMS-Module, single channel, full bridge, 16 (24) Bit
auto/self calibration, parallel operation of load cells, 
onboard power supply 2,5V, 5V, 7,5V, 10V, 12V

SLIO ENERGY MEASURMENT MODULE

The module allows the measurement of electric data for counting energy and power measurement. Here, the voltage measurement of each phase is directly measured and the current is measured indirectly via current transformers. In consideration of the permissible total current, you can also perform an energy measurement on devices, which are within the same phase.
  • 3-phase and neutral wires 230/400V 1A
  • Retentive storage of the energy values
  • Diagnostic function
  • Resolution of the measured value 24bit
  • The following measurements can be found in 4-quadrant operation:
- Voltage, current
- Electrical power
- Electrical work
- Harmonics
- Phase shift cos phi
- Frequency
Energy_Measerment_Module.jpg
ENERGY MEASURMENT-MODULE
incl. 001-0AA00 TERMINAL MODULE
Order No.:
         Name / Technical data
053-1CA00
SM 031 - Energymeasure-Module, 1/3-phase, 230/400VAC, resolution measured
value 24 bit, avialable measurement:active energy, temperature, frequency,
voltage RMS, current RMS,active power, reactive power, apparent power,
cos phi, harmonic voltage RMS, harmonic current RMS

STEPPER MODULE

Stepper_Modul_N.jpg
Operating types
  • Reference
  • Positioning
  • Speed control

DC-MOTOR MODULE

DC_Motor_Modul_N.jpg
Operating types
  • Reference
  • Positioning
  • Speed / torque control
Puls_train_Modul_N.jpg

PLUSTRAIN MODULE

Operating types
  • Reference
  • Positioning
  • Speed control
MOTION MODULES
inCl. 001-0AA00 TERMINAL MODULE
Order No.:
                           Name / Technical data
054-1BA00
FM 054 - stepper module / 1-channel with feedback,
2 outputs 24VDC/1,5A, 2 inputs 24 VDC, current control frequency 32 kHz,
step pattern 64-times microstepping
054-1CB00
FM 054 - DC-motor module / 2-channel with feedback,
2 outputs 24VDC for 2x 1,5A DC motors, 2 inputs 24 VDC,
PWM clock frequency 32 kHz
054-1DA00
FM 054 - Pulse Train Output Module / 1-channel RS422 with feedback,
2 outputs A/B phase 24 VDC, 2 inputs VDC, 0 to 1.000 kHz