VIPA
Elektronik-Systeme GmbH

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

Mo-Th:
09:00-12:00 / 13:00-16:00
Fr:
09:00 - 13:00

New in our portfolio: INSYS icom - Professional Data Communication, Smart Devices
Secure, cost-efficient and future-proofed for the Industrial IoT use industrial routers from INSYS icom.
Our catalog SUCCESSFUL AUTOMATION 2021 already contains all new products with prices.
You can also find the link to the catalog on our homepage.

Corona - Information:
We are in full operation and will be happy to promptly supply you with all of the modules from our portfolio.
PLC >> VIPA 200V MODULAR PLC-System

System 200V Step®7 programmable

Modular PLC-System - CPU-, Fieldbus-Interfaces

The CPUs of the system 200V need only 30% of the space required of the S7-300® CPUs, but nevertheless operate with the full STEP®7 instruction set S7-315® by SIEMENS.
Through the standard MPI interface via PG programming unit, PC adaptor and operator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected. To save the project, a custom MMC card can be used.
The RAM and Flash memory necessary for the operation are included in the CPU. Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unit can be combined in different CPU variations. High memory sizes up to 128kByte program memory and 192kByte load memory with short cycle times offer a big area of application. A CPU can supply up to 32 units.
Step7_TIA.jpg
Masse_VIPA200_E.jpg
CPU214SER.jpg
CPU215.jpg
CPUs
CPU HW identification uniformly: 6ES7315-2AG10-0AB0/V2.6
CPU 21x
Order No.
Memory / Load Memory
Interfaces
VIPA 214-1BC06
48/80kByte
MPI
VIPA 214-1BA06
96/144kByte
MPI
VIPA 214-1BM06
96/144kByte
MPI/DP-Master
VIPA 215-1BA06
128/192kByte
MPI
VIPA 215-1BE06
128/192kByte
MPI / LAN (PG/OP)
VIPA 215-1BT06
128/192kByte
MPI / LAN(CP343)
CPU214NET.jpg
STEP7.jpg
CPUs
CPU HW identification uniformly: 6ES7315-2AF03-0AB0/V1.2
CPU 21x
Order No.:
Memory / Load Memory
Interfaces
VIPA 214-1BC03
48/80kByte
MPI
VIPA 214-1BA03
96/144kByte
MPI
VIPA 214-1BE03
96/144kByte
MPI / LAN (PG/OP)
VIPA 214-1BP03
96/144kByte
MPI / DP-Slave
VIPA 214-1BS13
96/144kByte
MPI / 1x RS232
VIPA 214-1BS33
96/144kByte
MPI / 1x RS485 
VIPA 214-1BT13
96/144kByte
MPI / LAN(CP343)
VIPA 215-1BA03
128/192kByte
MPI
VIPA 215-1BE03
128/192kByte
MPI / LAN (PG/OP)
VIPA 215-1BP03
128/192kByte
MPI / DP-Slave
VIPA 215-1BM03
128/192kByte
MPI / DP-Master
VIPA 215-1CM03
128/192kByte
MPI/CANopen-Master
VIPA 215-1BS03
128/192kByte
MPI / 2x RS232
VIPA 215-1BS33
128/192kByte
MPI / 1x RS485
VIPA 215-1BT13
128/192kByte
MPI / LAN(CP343) 
VIPA 953-0KX10
512MByte
MMC-Speicherkarte
VIPA 950-0KB00
-
PG/AG-Download-Kabel
CPUIM253DPO.jpg
FiELDBUS-SLAVE INTERFACES
Order No.:
Technical data
VIPA 253-1DP01
PROFIBUS-DP, address 1-99
VIPA 253-1CA01
CANopen, address 1-99
VIPA 253-1NE01
Ethernet, ModbusTCP
CPUIM253DP.jpg
FIELDBUS-SLAVE ECO INTERFACES
Order No.:
Technical data
VIPA 253-1DP31
PROFIBUS DP-Slave, address 1-125,
up to 8 units, DC 24V, 
12MBaud, DP-V0, DP-V1

Masse_VIPA200_E.jpg
CPUSM238C.jpg
FUNCTIONMODULES
Order No.:
Technical data
VIPA 238-2BC00
SM 238C system expansion, 12 DI, 4 DI/O
24VDC 1A, 6 (16 Bits)/3 (32 Bits) of counter 30kHz,
3x AI 12 bits: ±10V / 4V / 400mV / 20mA
and 4-20mA 1x AI 12 bits: Pt100 / 1000,
Ni100/1000, 600/3000 ohm, 2xAA 12bits:
±10V / 20mA, 1-5V, 0-10V, 0-20mA, 4-20mA
VIPA 250-1BA00
2x 32 Bit / 4x16 Bit incremental counter
inputs 24VDC, max. 1Mhz, 2x DO 24VDC/1A
VIPA 250-1BS00
1 x 12 / 24 Bit SSI-Zählereingang, RS422,
600kBd,  2x DO 24VDC/1A
VIPA 254-1BA00
Positioning-module FM for servomotor,
1 axis, incremental encoder RS422,
potential decoupled,
DI 3x DC 24V, DO 2x DC 24V/1A
CPUCP240RS232C_CM240.jpg
CP-MODULES
Order No.:
                  Technical data
VIPA 208-1DP01
PROFIBUS-DP master, up to 12Mbps, 100/200V
VIPA 240-1BA20
RS232, DB9, ASCII, 3964R, MODBUS RTU/ASCII
VIPA 240-1CA20
RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII
VIPA 240-1CA21
RS422/RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII
CPUCP240M-Bus.jpg
M-BUS
Order No.:
            Technical data
VIPA 240-1FA20
Communication processor for M-Bus-system
(Metering-Bus), 2-wire fieldbus for data
acquisition of consumption, electrical isolated,
up to 6 slaves possible.
CPU207-BA001.jpg
POWERPACKS & PASSIV TERMINALS MODULES
Order No.:
        Technical data
VIPA 207-1BA00
prim. AC 100-240VAC/sec. 24VDC, 2A
VIPA 207-1BA20
prim. AC 100-240VAC/sec. 24VDC, 2A
± on 2x11 terminals red/blue
VIPA 207-1AA00
2x 11 terminals, in each case for the
potential distribution, grey-grey
VIPA 207-1A10
2x 11 terminals, in each case for the
potential distribution, green / yellow-grey
VIPA 207-1A20
2x 11 terminals, in each case for the
potential distribution, red/blue
VIPA 207-1A40
2x 5 terminals, gray-gray
2x 6 terminals, red/blue
VIPA 290-1AF30
35mm Alu DIN-Rail, Length: 530mm
Order No.:LINE EXTENTION
VIPA 260-1XY05cable connection 0.5m
VIPA 260-1XY10cable connection  1m
CPU_Schiene.jpg
Order No.:BACKWALLBUS
VIPA 290-0AA10
1
VIPA 290-0AA20
2
VIPA 290-0AA40
4
VIPA 290-0AA80
8
Arbitrarily addable to max. 32 units.
CPUSM221.jpg
Order No.:DIGITAL INPUT
VIPA 221-1BF00
DI 8x DC 24V
VIPA 221-1BF50
DI 8x DC 24V, NPN
VIPA 221-1BF10
DI 8x DC 24V, 0,2ms
VIPA 221-1BF21
DI 8x, alarm, DC 24V, 0,2ms
VIPA 221-1BH10
DI 16x DC 24V
VIPA 221-2BL10
DI 32x DC 24V
VIPA 221-1FF50
DI 8x AC 180...265V
VIPA 221-1BH20
DI 16x DC 24V, (2x counter)
VIPA 221-1BF30
DI 8x DC 24V, ECO
VIPA 221-1BH30
DI 16x DC 24V, ECO
CPUSM222.jpg
Order No.:DIGITALE OUTPUT
VIPA 222-1BF00
DO 8x DC 24V, 1A
VIPA 222-1BF10
DO 8x DC 24V, 2A
VIPA 222-1BH10
DO 16x DC 24V, 1A
VIPA 222-1BH20
DO 16x DC 24V, 2A
VIPA 222-1BH50
DO 16x DC 24V, 0.5A, NPN
VIPA 222-2BL10
DO 32x DC 24V, 1A
VIPA 222-1HF00
DO 8x Relais, 230VAC/24VDC, 5A
VIPA 222-1HD10
DO 4x relay, galvanic decoupled,
230VAC/30VDC, 5A
VIPA 222-1FF00
DO 2x, solide-state, 230VAC/400VDC, 0.5A
VIPA 222-1BF30
DO 8x DC 24V, 0.5A, ECO
VIPA 222-1BH30
DO 16x DC 24V, 0.5A, ECO
CPUs_Schien.jpg
CPUSM223.jpg
DIGITALE INPUT ANDOUTPUT
Order No.:
      Technical data
VIPA 223-1BF00
DI/O 8x DC 24V, 1A, soft-configurable
VIPA 223-2BL10
DI/O 16x DC 24V and DO 16x DC 24V, 1A
CPU-SM231.jpg
CPU-SM232.jpg
ANALOG INPUT AND OUTPUT
Order No.:
                   Technical data
VIPA 231-1BD53
Analog input, 2 conductors/4x 16Bit, 4 conductors/2x 16Bit
PT100, PT/Ni1000, NiCrNi, thermocouple, J, K, N, R, S, T
±10V, ±400mV, ±20mA, 4-20mA
VIPA 231-1BD60
Analog input, 4x12 Bit, 0/4-20mA, 
potential decoupled channel
VIPA 231-1BD70
Analog input, 4x 12Bit, ±10V, 
potential decoupled channel
VIPA 231-1BF00
Analog input 2conductor/8x 16 Bit, 4conductor/4x16 Bit,
PT100, thermocouple J, K, T, 0 - 60mV
VIPA 231-1FD00
Analog input FAST, 4x 16Bit, ±400mV, ±4V, ±10V,
±20mA, 4-20mA, process and diagnosis alarm, average
value generation more than the last 2.4, 8 or 16 values,
cycle time 1ms for 4 channels
VIPA 232-1BD51
Analog source module, 4 outputs 0-10V, ±10V, 0-20mA, 12Bit
VIPA 234-1BD50
Analog input and output 2x 12Bit of input, 2x 12Bit
±10V, 0 - 10V, 1 - 5V, ±20mA, 0 - 20mA, 4 - 20mA
VIPA 234-1BD60
3x AI 12Bit: ±10V/4 V/400mV/20 mA and 4-20mA,
1x AI 12Bit: Pt100/1000, Ni100/1000, 600/3000 Ohm,
2x AO 12Bit: ±10V/20mA, 1-5V, 0-10V, 0-20mA, 4-20mA,
default value can be activated at PLC stop.
VIPA 231-1BD30
AI4x 12Bit, ±10V, ECO
VIPA 231-1BD40
AI4x 12Bit, 4..20mA, ±20mA, ECO
VIPA 232-1BD30
AO4x 12Bit, 0..10V, ±10V, ECO
VIPA 232-1BD40
AO4x 12Bit, 0/4..20mA, ECO