VIPA
Elektronik-Systeme GmbH in Liqu.

Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at

Office hours:

PERMANENTLY CLOSED


NEWS

Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
PLC >> VIPA MICRO SPS

MICRO PLC

High Performance in Micro Dimension

With the new MICRO“, VIPA Controls will be presenting a very compact and extremely fast MICRO control system at the SPS IPC Drives 2016. The design has a definite wow-factor and it opens up completely new paths in regards to operating and status display. Thus the MICRO PLC is the starting signal for the new VIPA controller generation.

The MICRO PLCs are distinguished by modern and functional design, very compact size, high performance and high channel density. The design of the MICRO PLC contains a new display and operating concept that enables the user to see the essential control information of the system at a glance. For this, display and operating elements deliberately concentrate on the essentials that are required in practice. The new MICRO“ – as the name suggests – is extremely compact. With a width of less than 72 millimeters the VIPA MICRO PLC is up to 50% smaller than typical MICRO controllers. With 30 integrated digital and analog I/O channels on board it offers multifarious usage options as a stand-alone CPU too, and can be expanded with up to eight modules. Digital, analog and serial modules are available, more modules are constantly being expanded.

Firm hold by spring terminal technology
The connection plugs of the “MICRO are individually detachable and therefore suitable for the pre-wiring in the series launch. Equipped with the convenient push-in technology they can be mounted and replaced quickly and easily, and without tools. In addition the plugs have spring terminals which not only allow easy wiring but also withstand every vibration. The allocation of the I/O display LEDs directly on the appropriate plug connection allows the user an easy and clear allocation of the channel status even at such a high channel density.
Interfaces, communication and memory
A powerful PROFINET controller, a PN i-device and a PN MRP client are part of the basic equipment. The MICRO PLC M13C communicates via Ethernet TCP / IP and supports S7TCP PG / OP protocol as well as ISOonTCP, ModbusTCPP and OPC UA-Server. The user has also the option of using the PROFIBUS slave function, PtP with ModbusRTU and MPI with an expansion module. Further functionalities of the SLIO system such as larger memory or field bus connections can be enabled if necessary using the multiple award-wining VIPA Set Card (VSC), which is unique in the world of automation.
A special feature is a web server with a good equipped WebVisu, which can be configured via the Speed7 Studio.Visu, which can be configured via the Speed7 Studio.
VIPA_CPU_M13C_N1.jpg
OPC-UA_Server_E.jpg
VIPSA_CPU_M13C_N2.jpg
Button1.jpg

Highlights:

  • Up to date, pleasing, and functional design
  • Extremly compact construction size
  • Very high performance with SPEED7® technology
  • Fast backplane bus connection of 48 MBit/s
  • 30 integrated I/Os on board
  • CPU expandable up to max. 8 modules
  • Detachable connection plug with spring terminal and push-in technology
  • 2-port Ethernet switch
  • S7TCP, ISOonTCP, ModbusTCP, PROFINET-controller, -idevice, -MRP client, OPC UA-Server
  • Optional 2x RS485 module for MPI, PtP (ModbusRTU) and optional PROFIBUS slave
  • 64 up to 128 kByte remanent work memory and 128 kByte load memory
  • Full STEP7® compatible supports IL, LAD, FBD, SCL and GRAPH7
  • Programmable with SPEED7® Studio, SIEMENS SIMATIC manager and SIEMENS TIA Portal
  • WebVisu on Board
  • Very good price / performance ratio
CPU
Order No.:Technical data
M13-CCF0000
CPU M13C powered by SPEED7®, 64 - 128 kB
onboard: 16 DE / 12 DA / 2 AE (12Bit/0-10V) / 4 counter / 2 PWM
switch 2x RJ45: PG/OP Ethernet-Interface for S7TCP, ModbusTCP, 
OPC UA-Server, PROFINET Controler/i-Device for max. 4 connections,
PtP: ASCII, STX/ETX, 3964(R), USS Master,
Modbus Master/Slave, SD card slot, expandable up to max. 8 modules,
programmable with SPEED7® Studio
WinPLC7, SIMATIC manager and SIEMENSTIA Portal.
HW-identification: 6ES7314-6EH04-0AB0 V3.3 + 6GK343-1EX30-0XE00
M13-CCF0001
powered by SPEED7®, same as M13-CCF0000, 
additional: 2 AE (12Bit/0-10V/4-20mA)
DIGITAL IN- & OUTPUT
Order No.:
Technical data
 M21-1BH00
SM M21, 16 DE 24V DC
 M22-1BH00
SM M22, 16 DA DC 24V, 0,5 A
 M22-1HF10
SM M22, 8 DA 230V-AC / 2,5 A relay
 M23-1BH00
SM M23, 8 DE 24DC, 8 DA 24V / 0,5 A
 M31-1CD50
SM M31- 4x AE, 16Bit, 0/1...10 V +-10 V, 0/4...20 mA,
R 0....3000 Ohm, RTD PT100, PT1000, NI100, NI1000,
TC Typ J, K, N, R, S, T, B, C, E, L und U +-80 mV
 M32-1BD40
SM M32 - 4x AA, 0/4...20mA
 M32-1BD70
SM M32 - 4x AA, 0/1...10V_+-10V
POWER SUPPLY & EXTENSIONS
Order No.:
Technical data
 M07-2BA00Power Supply prim. AC 100-240VAC/sec. 24VDC, 1,5A  
M09-0CB00IM M09, interface (2x RS485): MPI, PROFIBUS Slave,
PtP: ASCII, 3964(R), USS Master, Modbus RTU M/S
955-0000000
VIPASD card standard (empty), necessary for WebVisu
FSC-C000020
64kByte FSC-extension code
Order Nr.:
Name
013-CCF00000
CPU M13C
Power supply
Power supply (rated value)
Reverse polarity protection
Current consumption (no-load operation)

DC 24 V (20,4...28,8 VDC)
yes
120 mA, (rated value) 360mA
Environmental conditions
Operating temperature / Storage temperature

0 °C to 60 °C / -25 °C to 70 °C
Inputs / Outputs
Number of inputs 

Number of outputs
Output current at signal "1", rated value 
Output delay

16, input delay adjustable: 
3 µs - 15 ms / 0,5 ms 15 ms
12
0,5 A, trigger level: 1A
"0" nach "1" 2 µs bis 30 µs /"1" nach "0" 3 µs bis 175 µs
Analog inputs
Number of inputs
Input voltage ranges
Resolution in bit
Basic conversion time

2
0 V ... +10 V / 100 kΩ Min. input resistance (voltage range)
12 / successive approximation
0,5 ms
Counters
Number of counters
Counter width

4 / max. 100 kHz
32 Bit
Address areas (I/O)
Address area input I/O / output I/O
Process image input / output
Max. expansion

2048 / 2048 Byte
max. 2048 / 2048 Byte
digital inputs 144 / digital outputs 140
Point-to-Point protocole
Protokocols

ASCII, STX/ETX, 3964(R), USS Master,
Modbus Master / Slave
Load and working memory
Load memory, integrated
Work memory, integrated
Memory
Memory Card Slot

128 KB / max. 128 KB6
4 KB / max. 128 KB
divided (50% Code / 50% Daten)
SD / MMC-Card with max. 2 GB
Command processing times
Bit instructions
Word instruction
Double integer arithmetic
Floating-point arithmetic

min. 0,02 µs
min. 0,02 µs
min. 0,02 µs
min. 0,12 µs
Timers/Counters and their retentive characteristics
Number of S7 counters / times
S7-counters / times 
S7-counters / times 

512 / 512
remanence adjustable 0 up to 512 / 0 to 512
preset remanence Z0 .. Z7 / no remanence
Blocks
Number of OBs
Number of FBs
Number of FCs

22
1024
1024
Time
Real-time clock buffered 
Number of operating hours counter

yes
8
Functionality RJ45 interfaces
Type of interface / connector
Number of connections

Ethernet 10/100 MBit Switch / 2 x RJ45
max. 4
Ethernet communication via PG/OP
Number of productive connections via PG / OP
Number of productive connections NetPro
S7-connections 

TCP-connections 

ISO on TCP-connections  (RFC 1006)

max. 2
max. 2
BSEND, BRCV, GET, PUT,
connection of active and passive data handling
FETCH PASSIV, WRITE PASSIV,
connection of passive data handling
FETCH PASSIV, WRITE PASSIV,
connection of passive data handling
Ethernet open communication via PG / OP
Number of configurable connections
ISO on TCP connections (RFC 1006) 

max. 2
TSEND, TRCV, TCON, TDISCON 
Properties RS485-Ports:
MPI / PtP:
DP-Master / Slave:
Max.  Connections/Slaves:
PG / OP communikation:
Transmission speed MPI / DP:
DP Adressrange inputs / outputs
DP Transfer range inputs / outputs per Slave
PtP Transmission speed:

yes
optional
32
yes
9,6 kbit/s - 12 Mbit/s
max. 2 KB / max. 2 KB
max. 244 Byte / max. 244 Byte
1,2 kbit/s - 115,5 kbit/s
WebVisu viar PG/OP
Number of connections WebVisu
ProtokolleWebVisu supports

max: 4
HTTP / HTTPS
Properties PROFINET IO controller via PG / OP
Conformance Class
Number of PN IO Devices
Shared Device and MRP Client support
Address range inputs / outputs
Update time
Parallel operation as controller and I-Device 

PROFINET IO
8
yes
max. 2 KB / max. 2 KB
1 ms .. 512 ms
yes
Properties PROFINET I-Device via PG / OP
I/O data range
Update time
Mode as Shared I-Device

max. 768 Byte
1 ms .. 512 ms
yes
Management & diagnosis via PG / OP
Protocols
Web based diagnosis

ICMP, DCP, DHCP, LLDP / SNMP, NTP
yes
By using up to 8 peripheral modules, you can expand the internal I / O areas. The connection to the CPU is made by plugging in on the right side of the CPU.
Masse_M13C.jpg
Dimensions CPU M13C in mm
Masse_Peripheriemodul.jpg
Dimensions periphery modul in mm
Masse_Erweiterungsmodul.jpg
Dimensions extension module EM M09 in mm