VIPA
Elektronik-Systeme GmbH in Liqu.
Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at
Fax: +43 1 895936350
Office hours:
PERMANENTLY CLOSED
Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
The final closure and deletion from the commercial register took place on June 30, 2023
PLC >> VIPA 200V MODULAR PLC-System
System 200V Step®7 programmable
Modular PLC-System - CPU-, Fieldbus-Interfaces
The CPUs of the system 200V need only 30% of the space required of the S7-300® CPUs, but nevertheless operate with the full STEP®7 instruction set S7-315® by SIEMENS.
Through the standard MPI interface via PG programming unit, PC adaptor and operator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected. To save the project, a custom MMC card can be used.
The RAM and Flash memory necessary for the operation are included in the CPU. Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unit can be combined in different CPU variations. High memory sizes up to 128kByte program memory and 192kByte load memory with short cycle times offer a big area of application. A CPU can supply up to 32 units.
Through the standard MPI interface via PG programming unit, PC adaptor and operator panels from SIEMENS, ESA, ADVANTECH, VIPA a.s.o. can be connected. To save the project, a custom MMC card can be used.
The RAM and Flash memory necessary for the operation are included in the CPU. Additionally PROFIBUS-DP master, DP-Slave, RS232 interface or TCP/IP CP-unit can be combined in different CPU variations. High memory sizes up to 128kByte program memory and 192kByte load memory with short cycle times offer a big area of application. A CPU can supply up to 32 units.
| CPUs CPU HW identification uniformly: 6ES7315-2AG10-0AB0/V2.6 | ||
|---|---|---|
| CPU 21x Order No. | Memory / Load Memory | Interfaces |
| VIPA 214-1BC06 | 48/80kByte | MPI |
| VIPA 214-1BA06 | 96/144kByte | MPI |
| VIPA 214-2BM06 | 96/144kByte | MPI/DP-Master |
| VIPA 215-1BA06 | 128/192kByte | MPI |
| VIPA 215-2BE06 | 128/192kByte | MPI / LAN (PG/OP) |
| VIPA 215-2BT06 | 128/192kByte | MPI / LAN (CP343) |
| CPUs CPU HW identification uniformly: 6ES7315-2AF03-0AB0/V1.2 | ||
|---|---|---|
| CPU 21x Order No.: | Memory / Load Memory | Interfaces |
| VIPA 214-1BC03 | 48/80kByte | MPI |
| VIPA 214-1BA03 | 96/144kByte | MPI |
| VIPA 214-2BE03 | 96/144kByte | MPI / LAN (PG/OP) |
| VIPA 214-2BP03 | 96/144kByte | MPI / DP-Slave |
| VIPA 214-2BS13 | 96/144kByte | MPI / 1x RS232 |
| VIPA 214-2BS33 | 96/144kByte | MPI / 1x RS485 |
| VIPA 214-2BT13 | 96/144kByte | MPI / LAN(CP343) |
| VIPA 215-1BA03 | 128/192kByte | MPI |
| VIPA 215-2BE03 | 128/192kByte | MPI / LAN (PG/OP) |
| VIPA 215-2BP03 | 128/192kByte | MPI / DP-Slave |
| VIPA 215-2BM03 | 128/192kByte | MPI / DP-Master |
| VIPA 215-2CM03 | 128/192kByte | MPI/CANopen-Master |
| VIPA 215-2BS03 | 128/192kByte | MPI / 2x RS232 |
| VIPA 215-2BS33 | 128/192kByte | MPI / 1x RS485 |
| VIPA 215-1BT13 | 128/192kByte | MPI / LAN(CP343) |
| VIPA 953-0KX10 | 512MByte | MMC-Speicherkarte |
| FiELDBUS-SLAVE INTERFACES | |
|---|---|
| Order No.: | Technical data |
| VIPA 253-1DP01 | PROFIBUS-DP, address 1-99 |
| VIPA 253-1CA01 | CANopen, address 1-99 |
| VIPA 253-1NE01 | Ethernet, ModbusTCP |
| FIELDBUS-SLAVE ECO INTERFACES | |
|---|---|
| Order No.: | Technical data |
| VIPA 253-1DP31 | PROFIBUS DP-Slave, address 1-125, up to 8 units, DC 24V, 12MBaud, DP-V0, DP-V1 |
| FUNCTIONMODULES | |
|---|---|
| Order No.: | Technical data |
| VIPA 238-2BC00 | SM 238C system expansion, 12 DI, 4 DI/O 24VDC 1A, 6 (16 Bits)/3 (32 Bits) of counter 30kHz, 3x AI 12 bits: ±10V / 4V / 400mV / 20mA and 4-20mA 1x AI 12 bits: Pt100 / 1000, Ni100/1000, 600/3000 ohm, 2xAA 12bits: ±10V / 20mA, 1-5V, 0-10V, 0-20mA, 4-20mA |
| VIPA 250-1BA00 | 2x 32 Bit / 4x16 Bit incremental counter inputs 24VDC, max. 1Mhz, 2x DO 24VDC/1A |
| VIPA 250-1BS00 | 1 x 12 / 24 Bit SSI-Zählereingang, RS422, 600kBd, 2x DO 24VDC/1A |
| CP-MODULES | |
|---|---|
| Order No.: | Technical data |
| VIPA 208-1DP01 | PROFIBUS-DP master, up to 12Mbps, 100/200V |
| VIPA 240-1BA20 | RS232, DB9, ASCII, 3964R, MODBUS RTU/ASCII |
| VIPA 240-1CA20 | RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII |
| VIPA 240-1CA21 | RS422/RS485, DB9, ASCII, 3964R, MODBUS RTU/ASCII |
| M-BUS | |
|---|---|
| Order No.: | Technical data |
| VIPA 240-1FA20 | Communication processor for M-Bus-system (Metering-Bus), 2-wire fieldbus for data acquisition of consumption, electrical isolated, up to 6 slaves possible. |
| POWERPACKS & PASSIV TERMINALS MODULES | |
|---|---|
| Order No.: | Technical data |
| VIPA 207-1BA00 | prim. AC 100-240VAC/sec. 24VDC, 2A |
| VIPA 207-1BA20 | prim. AC 100-240VAC/sec. 24VDC, 2A ± on 2x11 terminals red/blue |
| VIPA 207-1AA00 | 2x 11 terminals, in each case for the potential distribution, grey-grey |
| VIPA 207-1A10 | 2x 11 terminals, in each case for the potential distribution, green / yellow-grey |
| VIPA 207-1A20 | 2x 11 terminals, in each case for the potential distribution, red/blue |
| VIPA 207-1A40 | 2x 5 terminals, gray-gray 2x 6 terminals, red/blue |
| VIPA 290-1AF30 | 35mm Alu DIN-Rail, Length: 530mm |
| Order No.: | BACKWALLBUS |
|---|---|
| VIPA 290-0AA10 | 1 |
| VIPA 290-0AA20 | 2 |
| VIPA 290-0AA40 | 4 |
| VIPA 290-0AA80 | 8 |
| Arbitrarily addable to max. 32 units. | |
| Order No.: | DIGITAL INPUT |
|---|---|
| VIPA 221-1BF00 | DI 8x DC 24V |
| VIPA 221-1BF50 | DI 8x DC 24V, NPN |
| VIPA 221-1BF10 | DI 8x DC 24V, 0,2ms |
| VIPA 221-1BF21 | DI 8x, alarm, DC 24V, 0,2ms |
| VIPA 221-1BH10 | DI 16x DC 24V |
| VIPA 221-2BL10 | DI 32x DC 24V |
| VIPA 221-1FF50 | DI 8x AC 180...265V |
| VIPA 221-1BH20 | DI 16x DC 24V, (2x counter) |
| VIPA 221-1BF30 | DI 8x DC 24V, ECO |
| VIPA 221-1BH30 | DI 16x DC 24V, ECO |
| Order No.: | DIGITALE OUTPUT |
|---|---|
| VIPA 222-1BF00 | DO 8x DC 24V, 1A |
| VIPA 222-1BF10 | DO 8x DC 24V, 2A |
| VIPA 222-1BH10 | DO 16x DC 24V, 1A |
| VIPA 222-1BH20 | DO 16x DC 24V, 2A |
| VIPA 222-1BH50 | DO 16x DC 24V, 0.5A, NPN |
| VIPA 222-2BL10 | DO 32x DC 24V, 1A |
| VIPA 222-1HF00 | DO 8x Relais, 230VAC/24VDC, 5A |
| VIPA 222-1HD10 | DO 4x relay, galvanic decoupled, 230VAC/30VDC, 5A |
| VIPA 222-1FF00 | DO 2x, solide-state, 230VAC/400VDC, 0.5A |
| VIPA 222-1BF30 | DO 8x DC 24V, 0.5A, ECO |
| VIPA 222-1BH30 | DO 16x DC 24V, 0.5A, ECO |
| DIGITALE INPUT ANDOUTPUT | |
|---|---|
| Order No.: | Technical data |
| VIPA 223-1BF00 | DI/O 8x DC 24V, 1A, soft-configurable |
| VIPA 223-2BL10 | DI/O 16x DC 24V and DO 16x DC 24V, 1A |
| ANALOG INPUT AND OUTPUT | |
|---|---|
| Order No.: | Technical data |
| VIPA 231-1BD53 | Analog input, 2 conductors/4x 16Bit, 4 conductors/2x 16Bit PT100, PT/Ni1000, NiCrNi, thermocouple, J, K, N, R, S, T ±10V, ±400mV, ±20mA, 4-20mA |
| VIPA 231-1BD60 | Analog input, 4x12 Bit, 0/4-20mA, potential decoupled channel |
| VIPA 231-1BD70 | Analog input, 4x 12Bit, ±10V, potential decoupled channel |
| VIPA 231-1BF00 | Analog input 2conductor/8x 16 Bit, 4conductor/4x16 Bit, PT100, thermocouple J, K, T, 0 - 60mV |
| VIPA 231-1FD00 | Analog input FAST, 4x 16Bit, ±400mV, ±4V, ±10V, ±20mA, 4-20mA, process and diagnosis alarm, average value generation more than the last 2.4, 8 or 16 values, cycle time 1ms for 4 channels |
| VIPA 232-1BD51 | Analog source module, 4 outputs 0-10V, ±10V, 0-20mA, 12Bit |
| VIPA 234-1BD50 | Analog input and output 2x 12Bit of input, 2x 12Bit ±10V, 0 - 10V, 1 - 5V, ±20mA, 0 - 20mA, 4 - 20mA |
| VIPA 234-1BD60 | 3x AI 12Bit: ±10V/4 V/400mV/20 mA and 4-20mA, 1x AI 12Bit: Pt100/1000, Ni100/1000, 600/3000 Ohm, 2x AO 12Bit: ±10V/20mA, 1-5V, 0-10V, 0-20mA, 4-20mA, default value can be activated at PLC stop. |
| VIPA 231-1BD30 | AI4x 12Bit, ±10V, ECO |
| VIPA 231-1BD40 | AI4x 12Bit, 4..20mA, ±20mA, ECO |
| VIPA 232-1BD30 | AO4x 12Bit, 0..10V, ±10V, ECO |
| VIPA 232-1BD40 | AO4x 12Bit, 0/4..20mA, ECO |
AIONA