VIPA
Elektronik-Systeme GmbH in Liqu.
Hütteldorferstrasse 299 / Top 4 A-1140 Wien
Tel: +43 1 8959363
Fax: +43 1 895936350
Mail: elektroniksysteme@vipa.at
Fax: +43 1 895936350
Office hours:
PERMANENTLY CLOSED
Due to the retirement of the owner, the company ceased operations on December 31, 2022.
The final closure and deletion from the commercial register took place on June 30, 2023
The final closure and deletion from the commercial register took place on June 30, 2023
COMMUNICATION >> INSYS icom MRcards - Modular plug-in cards for MRX series routers
SMART IOT GATEWAYS
MRcards Modular plug-in cards for MRX series routers
Individual functionality
Combine MRcards with different functions, exactly fitting for your
application
IAll in one device
By bundling several functions, you save costs and space in the control cabinet. The administration of your systems also becomes more efficient, uniform and secure.
Combine MRcards with different functions, exactly fitting for your
application
IAll in one device
By bundling several functions, you save costs and space in the control cabinet. The administration of your systems also becomes more efficient, uniform and secure.
Fail-safe internet connection
Combine any combination of DSL, mobile telephony and fiber optics and thus realize all necessary fallback options
Efcient upgrades
If changes are required, you can add desired MRcards directly in your application. You keep the MRX device with the known configuration. Even future technology upgrades remain efficient: e.g. a switch to 5G mobile radio.
Combine any combination of DSL, mobile telephony and fiber optics and thus realize all necessary fallback options
Efcient upgrades
If changes are required, you can add desired MRcards directly in your application. You keep the MRX device with the known configuration. Even future technology upgrades remain efficient: e.g. a switch to 5G mobile radio.
MRcard PL 1.0
Cellular radio (LTE, UMTS, GPRS)
2 digital inputs
Cellular radio (LTE, UMTS, GPRS)
2 digital inputs
| MRcard PL1.0 (Cellular radio) | Mobile communcation |
|---|---|
| Frequency bands | 4G/LTE*: 800, 900, 1.800, 2.100, 2.600 MHz; LTE Cat. 3 (DL: 100 Mbps, UL: 50 Mbps) 3G/UMTS/HSPA: 900, 1.800, 2.100 MHz; UMTS, HSPA+ (DL Cat. 24, UL Cat. 6), 2G/GPRS/EDGE: 900/1.800 MHz; GPRS/EDGE Class 12 |
| Antenna connection /SIM | 2x SMA female (2G/3G/4G: Main, 3G: Rx Diversity, LTE: MIMO) / Slot for 1 Mini-SIM card (2FF), locked |
| Indications (LEDs) | Power, WAN (Internet connection), Signal (cellular radio), Info (configurable) |
| Inputs | 2 digital inputs for configurable actions, 1x low-active, 1x high-active (as per EN 61131-2, Type 1) |
| Voltage | Supplied via MRX, 2 further supply connections optional (redundancy) 12 ... 24 V DC (± 20%) |
| Power consumption / Operating temperature | Typical approx. 1.0 W, max. 5.0 W / -30 ... +75 °C 1 |
| Weight / Certifications | 80 g / CE |
MRcard PD-B 1.1
VDSL2
ADSL/2/2+
2 digital inputs
2 variants (-A, -B)
VDSL2
ADSL/2/2+
2 digital inputs
2 variants (-A, -B)
| MRcard PD -B 1.1 (VDSL/ADSL) | Mobile communcation |
|---|---|
| DSL-standards | MRcard PD-A (Annex A): VDSL2 G.993.2 Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G.993.5 ADSL/ADSL2/ADSL2+ G.992.1 Annex A, G.992.3. Annex A/L/M, G.992.5 Annex A and M, T1.413 MRcard PD-B (Annex B): VDSL2 G.993.2 Profile 8a, 8b, 8c, 8d, 12a, 12b, 17a. 30a, VDSL2 Vectoring G.993.5 ADSL/ADSL2/ADSL2+ G.992.1 Annex B, G.992.3. Annex B, G.992.5 Annex B and J |
| DSL connection / Function / Indications (LEDs) | RJ45 socket / PPPoE, PPPoA / Power, WAN (Internet connection), Info (configurable), DSL |
| Inputs | 2 digital inputs for configurable actions, 1x low-active, 1x high-active (as per EN 61131-2, Type 1) |
| Voltage | Supplied via MRX, 2 further supply connections optional (redundancy) 12 ... 24 V DC (± 20%) |
| Power consumption / Operating temperature | approx. 5.0 W / -25 ... +60 °C 2 |
| Weight / Certifications | 80 g / CE |
MRcard ES 1.0
4-port switch (10/100 MBit)
4-port switch (10/100 MBit)
| MRcard ES 1.0 (Ethernet Switch) | Ethernet Switch |
|---|---|
| Ports | 4 x RJ45, 10/100 MBit/s, full/half duplex, Auto MDI-X, 1.5 kV isolation voltage |
| Function | Each port can be freely assigned to the IP networks, link-up/down detection |
| Voltage | Supplied via MRX |
| Power consumption / Operating temperature | typical approx. 1.0 W, max. 1.5 W / -30 ... +75 °C |
| Weight / Certifications | 70 g / CE, FCC Part 15 Class B, IC |
| 1 Range +70...+75 °C: under extended conditions (refer to: www.insys-icom.com/extended) 2 Ranges -25 0°C and 55°C . 60°C under extended conditions (refer to: www.insys-icom.com/extended) Note: range 55°C 60°C only without further MRcards PD, PL or Fiber | |
MRcard SI 1.0
RS232
RS485
2 digital inputs
2 switch outputs
RS232
RS485
2 digital inputs
2 switch outputs
| MRcard SI 1.0 (serial) | Serial interface |
|---|---|
| RS232 (Serial1) / RS485 (Serial2) | 1 x RS232 / Terminal connector (D+, D-, GND), termination and bias via DIP switch |
| Functions | Serial-Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU gateway, modem emulation, editable AT answer list, phone number conversion to IP addresses) |
| USB 2.0 | Prepared, USB 2.0 host, socket type A, output current max. 200 mA |
| digital inputs | 2 digital inputs, monitorable status, high active, connection to 10 ... 24 V DC, as per EN 61131-2, type 1, push-in terminal connectors |
| digital outputs | 2x via terminals, potential-free change-over relay, switchable via action |
| Indications (LEDs) / Voltage | Condition of digital inputs and outputs / Supplied via MRX |
| terminals | Push-in terminal connectors (maintenance free), rigid/flexible conductors up to 2.5 mm2 Inputs/outputs: 2x 5-pin, RS485: 3-pin |
| Power consumption / Operating temperature | typical approx. 1.0 W, max. 2.5 W / -30 ... +75 °C |
| Weight / Certifications | 75 g / CE, FCC Part 15 Class B, IC |
MRcard PLS 1.0
Cellular radio / incl. US variant
RS232
2 digital inputs
1 digital output
Cellular radio / incl. US variant
RS232
2 digital inputs
1 digital output
| MRcard PLS 1.0 (Cellular radio / serial) | Mobile communication |
|---|---|
| Frequency bands (MRcard PLS) | 4G/LTE*: 800, 900, 1.800, 2.100, 2.600 MHz; LTE Cat. 3 (DL: max. 100 Mbps, UL: max. 50 Mbps) 3G/UMTS/HSPA: 900, 1.800, 2.100 MHz; UMTS, HSPA+ (DL Cat. 24, UL Cat. 6), 2G/GPRS/EDGE: 900/1.800 MHz; GPRS/EDGE Class 12 |
| Antenna connection /SIM | 2x SMA female (2G/3G/4G: Main, 3G: Rx Diversity, LTE: MIMO) / Slot for 1 Mini-SIM card (2FF), locked |
| Indications / RS232 | Power, WAN (Internet connection), Signal (cellular radio), Info (configurable) / 1 x RS232 / D-Sub-9 (m) |
| Functions | Serial-Ethernet gateway (incoming and outgoing connections, Modbus TCP/RTU gateway, modem emulation, editable AT answer list, translation of phone numbers to IP addresses) |
| Digital inputs / Digital outputs | 2 digital inputs, 1x contact input (active), 1x voltage-sensitive (passive, as per EN 61131-2, Type 1) / 1 open collector output |
| Voltage | Supplied via MRX, 2 further supply connections optional (redundancy) 12 ... 24 V DC (± 20%) |
| Power consumption / Operating temperature | Typ. 2,5 W, max. 5 W / -30 ... +75 °C* |
| Weight / Certifications | 95 g / CE (MRcard PLS), FCC part 15 class B, IC (MRcard PLS-US) |
| * Range +70...+75 °C: under extended conditions (refer to: www.insys-icom.com/extended) | |
MRcard IO 1.0
3 analogue inputs
1 analogue output
4 digital inputs
4 digital outputs
3 analogue inputs
1 analogue output
4 digital inputs
4 digital outputs
| MRcard IO 1.0 | |
|---|---|
| Analog inputs | 3x on push-in terminal (3-pin), measuring range individually selectable: voltage 0 10 V / current 0 / 4 20 mA, accuracy: ± 0.3 % to range value ± 100 ppm/K, isolated, also between the inputs |
| Analog Outputs | 1x on push-in terminal (2-pin), mode selectable: voltage 0 10 V / current 0 / 4 20 mA, accuracy: ± 0.3% to range ±100 ppm/K, resolution 12 bits |
| Digital inputs | 4x on push-in terminal (5-pin), can be switched together: contact input (active) or voltage-sensitive (passive, level as per EN 61131, Type 1), galvanic isolation |
| Digital outputs | 4x on push-in terminal (5-pin), relay normally open, load capacity max. 3 A per output, altogether max. 5 A |
| Indications | 4x LEDs change of digital inputs, states of analogue inputs, change of digital outputs |
| Voltage | Supplied via MRX |
| Power consumption / Operating temperature | typ./max. 1,5 W / -30 ... +70 °C |
| Weight / Certifications | 95 g / CE, FCC part 15 class B, IC |
MRcard Fiber 1.0
2x Gigabit-SFP
2 digital inputs
2x Gigabit-SFP
2 digital inputs
| MRcard Fiber 1.0 | SFP ports |
|---|---|
| SFP ports | 2x SFP cages for SFP transceiver modules as per SFP -MSA, 1000BASE-X, 100BASE-X |
| Indications | WAN (internet connections), SFP1, SFP2 (SF status and activity) |
| Inputs | 2 digital inputs for configurable actions, 1x low-activ, 1x high-activ, (as per EN 61 131-2, Typ 1) |
| Voltage | Supplied via MRX, 2 further supply connections optional (redundancy) 12 ... 24 V DC (± 20%) |
| Power consumption | Typ. max. 4 W (there of 3 W MRcard Fiber + approx. 0,5 W for each SFP-Modul) |
| Operating temperature | -30 ... +65 °C in combination with MRX DSL oder MRcard -30 ... +55 °C |
| Gewicht / Zulassung | 85 g / CE, FFC part 15 class B, IC |
AIONA